Log in

No account? Create an account
March 27th, 2016, 07:09 pm
Still looking for my goldilocks cup, with a new revelation


Not only am I new to this page, I am totally new to LiveJournal--having just broken up with Facebook. LOL. Bear with me, as I am trying to navigate this "way of social media".

My history: five vaginal births, very heavy (nearly hemorrhaging on day 2) flow. Tried cups about 10 years ago--had no real success, and gave up until a few months ago. I first used the Keeper (that was 10 years old, but barely used). I liked the firmness okay, but it was so dried up (ha ha!) that I had to throw it out, and wasn't super happy with it. Tried the Lunette 2--okay, but struggled with folds until I found the punch fold. Still, it slipped down too much. I then got the Sckoon, thinking the width was better--but oh, my--way too soft. I could never get it to open, regardless of the folds I tried. I guess I squeezed it shut. Finally got the Super Jennie--even worse regarding the ability to open it. So far, the Lunette, turned inside out and folded properly, opens the easiest--but isn't lovely, just tolerable. It slides down as well.

I have always considered my cervix high--I have only previously been able to even touch it once. Today--during my day 2--I realized that not only is my cervix NOT high--it is dangly! This COULD explain the problem I have had with every cup--it slides out. I cannot get out of the bathroom without feeling it slide down. IF I get it in "right" on the first day--stuck way in on the first day and up and to my left--it is fine. Once I empty them--they no longer will stay in.

I was strongly thinking I'd order a FemmyCycle. I thought the bulbous shape might be a good bet, and I liked the capacity. Due to my murder-scene-aftermath on day 2, I assumed the capacity of the regular size was the way to go. Now, figuring out my dangly cervix, should I assume to go with the low-cervix model--but what happens with capacity then? At any rate, I am now feeling like going back to square one due to finding out the cervix dangles starting day 2.

Does the dangly cervix explain why the cups slide out? What are my "new" options now with this information?

Please help, and forgive if this question was asked repeatedly but I cannot find it! I am so desperate to make this work. Tampons have been giving me so much pain due to the dryness, I think. Plus, on day 2--I have to change them every 15-20 minutes.
Current Mood: frustratedfrustrated
Kai: 2Cupskuradi8 on March 28th, 2016 01:23 pm (UTC)
The Super Jennie is a lot softer than the Keeper that you learned with and also a little softer than the Lunette that you think is OK. Because it's softer, it takes a little more coaxing to get it to open. Read the paragraphs about insertion at the link I gave you and see if the advice helps you. You need to adjust your technique.

Look at photos of the FemmyCycle. It has a very wide body compared to other brands but the opening on top is small -- 36mm, which when compared to cervical caps should be large enough to accommodate even "the largest" cervix.

As for Ben Wa Balls -- yes, some of the large (almost ping pong ball sized) ones are tethered together and work best when you push/pull them, either with a partner or alone. The little steel ones I linked to work hands-free. No interaction required.
heidiwashere: pic#126020360heidiwashere on March 28th, 2016 01:44 pm (UTC)
Yes, I did read that link--thank you SO much. I will try to re-read the part on insertion. Of course, this changes on the dry-runs if my cervix moves (I had heard it did sometimes, but had not realized it was happening so drastically for me).

So, regarding the Femmycycle, to clarify, are you stating that even with the narrower top, it should be able to accommodate cervixes without leaving a band mark--that perhaps that was a fluke with the poster who stated that? Just trying to figure that out.

I will probably order the Ben Wa balls this afternoon. Lol.

So--what I gather to be my "goldilocks" will be the cup that is firm, stays in (after working harder to tighten my cervix and the upper walls--???--since my walls are so tight I cannot get some cups to open), can accommodate my sometimes dangly cervix, and preferably higher capacity, although with the dangling, I might have to forego that since my cervix may take up room. Is that your suggestion?
Kai: 2Cupskuradi8 on March 28th, 2016 02:45 pm (UTC)
"since my walls are so tight I cannot get some cups to open"
No, it's probably due to lack of air, not tight vaginal walls. Get air into your cup to open it fully while it's still down low, then push it up into place.
Kathlynekathlyne on March 30th, 2016 10:21 pm (UTC)
I totally agree with kuradi on this one. You need air. You mentioned in another comment that you bear down as you push the cup up. That seems counterproductive. Pull your muscles up instead of bearing down, our just relax them as you push the cup up. Sounds like you just need more practice with insertion/opening.
heidiwashereheidiwashere on March 31st, 2016 09:04 pm (UTC)
The reason I bear down while pushing it up was that somebody on the FB group gave the link to the video that suggested that--doing that is the ONLY time the cup stays in, although it usually only works the first day. And this is after trying different folds.

With the Lunette--the only one that works marginally well (I still need pads)--if I do the punch down fold, then do the bear down while inserting, I have the most success.